Configuration Files Properties; Reboot - Cisco WAP131 Administration Manual

Administration

Reboot

STEP 4
STEP 1
STEP 2
STEP 3
Reboot
STEP 1
STEP 2
STEP 3
NOTE
STEP 4
Cisco WAP131 and WAP351 Administration Guide
Click Save to begin the copy process.

Configuration Files Properties

You can clear the Startup Configuration or Backup Configuration file. If you clear
the Startup Configuration file, the Backup Configuration file becomes active the
next time that you reboot the WAP device.
To delete the Startup Configuration or Backup Configuration file:
Select Administration > Manage Configuration File.
Select the Startup Configuration, or Backup Configuration file type.
Click Clear Files.
Use the Reboot page to reboot the WAP device or reset the WAP device to its
factory defaults.
To reboot or reset the WAP device:
Select Administration > Reboot.
To reboot the WAP device using Startup Configuration, click Reboot.
To reboot the WAP device using the factory default configuration file, click Reboot
To Factory Default. Any customized settings are lost.
A window appears prompting you to confirm or cancel the reboot. The current
management session may be terminated.
Click OK to reboot.
3
54