Cisco WAP131 Administration Manual page 166

Captive Portal
Web Portal Customization
STEP 6
STEP 7
Cisco WAP131 and WAP351 Administration Guide
• Fonts—The name of the font to use for all text on the CP page. You can enter
multiple font names, each separated by a comma. If the first font is not
available on the client system, the next font is used, and so on. For font names
that have spaces, surround the entire name in quotes. The range is from 1 to
512 characters. The default is MS UI Gothic, Arial, sans-serif.
• Browser Title—The text to show in the browser title bar. The range is from 1
to 128 characters. The default is Captive Portal.
• Browser Content—The text that shows in the page header, to the right of the
logo. The range is from 1 to 128 characters. The default is Welcome to the
Wireless Network.
• Content—The instructive text that shows in the page body below the user
name and password text boxes. The range is from 1 to 256 characters. The
default is To start using this service, enter your credentials and click the
connect button.
• Acceptance Use Policy—The text that appears in the Acceptance Use
Policy box. The range is from 1 to 4096 characters. The default is
Acceptance Use Policy.
• Accept Label—The text that instructs users to select the check box to
acknowledge reading and accepting the Acceptance Use Policy. The range
is from 1 to 128 characters.
• No Accept Text—The text that shows in a pop-up window when a user
submits login credentials without selecting the Acceptance Use Policy
check box. The range is from 1 to 128 characters.
• Work In Progress Text—The text that shows during the authentication. The
range is from 1 to 128 characters.
• Denied Text—The text that shows when a user fails the authentication. The
range is from 1 to 128 characters.
• Welcome Title—The text that shows when the client has authenticated to
the VAP. The range is from 1 to 128 characters.
• Welcome Content—The text that shows when the client has connected to
the network. The range is from 1 to 256 characters.
• Delete Locale—Deletes the current locale.
Click Save. Your changes are saved to the Startup Configuration.
Click Preview to view the updated page.
10
166