Cisco WAP131 Administration Manual page 23

Status and Statistics
Network Interfaces
Cisco WAP131 and WAP351 Administration Guide
- Default Gateway—The default gateway of the WAP device.
- Domain Name Server-1—The IP address of the domain name server 1
used by the WAP device.
- Domain Name Server-2—The IP address of the domain name server 2
used by the WAP device.
- IPv6 Address—The IPv6 address of the WAP device.
- IPv6 Autoconfigured Global Address—The IPv6 auto-configured
global address.
- IPv6 Link Local Address—The IPv6 link local address of the WAP
device.
- Default IPv6 Gateway—The default IPv6 gateway of the WAP device.
- IPv6-DNS-1—The IPv6 address of the IPv6 DNS server 1 used by the
WAP device.
- IPv6-DNS-2—The IPv6 address of the IPv6 DNS server 2 used by the
WAP device.
- Green Ethernet Mode (For WAP131 Only)—The Green Ethernet mode is
enabled or disabled on the WAP device.
- VLAN ID (For WAP131 Only)—The VLAN ID number of the WAP device.
These settings apply to the internal interface. Click the Edit link to change
any of these settings. You will be redirected to the
• Port Status (For WAP351 Only)—Displays the status for all 5 interfaces
(LAN1 to LAN5).
- Interface—Number of the Ethernet interface.
- Port Status—Status of the Ethernet interface.
- Port Speed—Speed of the Ethernet interface.
- Duplex Mode—Duplex mode of the Ethernet interface.
Click the Edit link to change any of these settings. You will be redirected to
the Port Settings
• VLAN Status (For WAP351 Only)—Displays information for all existed
VLANs, including:
- VLAN ID—Identifier of the VLAN.
page.
2
IPv4 Setting page.
23