Configuration Files Properties; Copy/Save Configuration - Cisco Small Business WAP551 Administration Manual

Administration

Configuration Files Properties

!
CAUTION
Configuration Files Properties
STEP 1
STEP 2
STEP 3

Copy/Save Configuration

STEP 1
STEP 2
Cisco Small Business WAP551 and WAP561 Wireless-N Access Point
Ensure that power to the WAP device remains uninterrupted while the configuration
file is downloading. If a power failure occurs while downloading the configuration
file, the file is lost and the process must be restarted.
The Configuration Files Properties page enables you to clear the Startup or
Backup Configuration file. If you clear the Startup Configuration file, the Backup
Configuration file becomes active the next time that you reboot the WAP device.
To delete the Startup Configuration or Backup Configuration file:
Select Administration > Configuration Files Properties in the navigation pane.
Select the Startup Configuration, or Backup Configuration file type.
Click Clear Files.
The Copy/Save Configuration page enables you to copy files within the WAP
device file system. For example, you can copy the Backup Configuration file to the
Startup Configuration file type, so that it is used the next time you boot up the
WAP device.
To copy a file to another file type:
Select Administration > Copy/Save Configuration in the navigation pane.
Select the Source File Name:
• Startup Configuration—Configuration file type used when the WAP device
last booted. This does not include any configuration changes applied but not
yet saved to the WAP device.
3
42