Firmware Upgrade; Schedule Power On/Off - Thecus N3200XXX Series User Manual

Firmware Upgrade

From the menu, choose the Firmware Upgrade item and the Firmware Upgrade
screen appears.
Follow the steps below to upgrade your firmware:
1. Use the Browse button
2. Press Apply.
3. The beeper beeps and the Busy LED blinks until the upgrade is complete.
NOTE
WARNING
NOTE

Schedule Power On/Off

Using the Thecus IP storage System Management, you can save energy and money
by scheduling the Thecus IP storage to turn itself on and off during certain times of
the day.
From the menu, choose the Schedule Power On/Off item and the Schedule
Power On/Off screen appears.
To designate a schedule for the Thecus IP storage to turn on and off, first enable the
feature by checking the Enable Schedule Power On/Off checkbox.
Then, simply choose an on and off time for each day of the week that you would like
to designate a schedule by using the various dropdowns.
Finally, click Apply to save your changes.
to find the firmware file.
• The beeper only beeps if it is enabled in the System Notification menu.
• Check Thecus website for the latest firmware release and release notes.
• Downgrading firmware is not permitted.
Do not turns off the system during the firmware upgrade process.
This will lead to a catastrophic result that may render the system inoperable.
•Save old firmware images and system configuration files before upgrading firmware in
case the system needs it later on. The backup files can will be stored on a USB disk if
available or in the nsync folder on your RAID partition. The backup will take
approximately 3-5 minutes to complete before carrying on with the firmware upgrade.
65