Thecus N3200XXX Series User Manual page 141

Add Nsync Task
From the Nsync screen, click Add to display the Add Nsync Task screen.
Add Nsync Task
Item
Task Name
Target Server
Manufacturer
Nsync Mode
Target Server IP
Address
Source Folder
Authorized Username
on Target Server
Password on Target
Server
Test Connection
Schedule
Time
Type
Add
NOTE
NOTE
Setting up an Nsync Target on an Thecus IP storage Nsync Device
Description
The name of your Nsync task.
Select replication to method, it has 3 options can choose from.
NAS: To other Thecus IP storage with security tunnel build up.
Legacy FTP: To the 3
it has acted as FTP server.
Native Rsync Server: Using rsync to replicate data to other Thecus
Synchronize mode or Incremental mode .
The IP address of your target server.
The share folder you want to backup.
The account name on the target server.
The password for the username on the target server.
Click to check the connection to the Target Server.
Enable or Disable schedule backup of your share folders.
The time when the Nsync task will run.
Select whether to run the Nsync task daily, weekly, or monthly.
Daily: input the time of day to execute Nsync task.
Weekly: input which day of the week to execute the task.
Monthly: decide which day of the month to execute the task.
Press Add to submit your settings.
Before starting an Nsync Task, make sure the target
server's Nsync Server (or FTP Server) is enabled.
Using "Native Rsync Server" to backup data to other
Thecus NAS devices needs to enable target server and
setup a valid username and password to grant access
permission.
141
rd
party FTP server or Thecus IP storage while
IP storage