Thecus N3200XXX Series User Manual page 122

ACL setting
Item
Deny
Read Only
Writable
Recursive
To configure folder access, follow the steps below:
1. On the ACL screen, all network groups and users are listed in the left hand
column. Select a group or user from this list.
2. With the group or user selected, press one of the buttons from the three
access level columns at the top. The group or user then appears in that
column and has that level of access to the folder.
3. Continue selecting groups and users and assigning them access levels using
the column buttons.
4. To remove a group or user from an access level column, press the Remove
button in that column.
Description
Denies access to users or groups who are displayed in this column.
Provides Read Only access to users or groups who are displayed in
this column.
Provides Write access to users or groups who are displayed in this
column.
Enable to inherit the access right for all its sub-folders.
122