Checking System Status; System Status Normal; System Trouble - Thecus N3200XXX Series User Manual

3. Open the front door then press the power button to boot up the
N3200XXX/N0503.
Make the following connections on the Thecus N4100PRO and then power up the
unit:
1. Connect an Ethernet cable from your network to the WAN port on the back
panel of the N4100PRO.
2. Connect the provided power cord into the universal power socket on the
back panel. Plug the other end of the cord into a surge protected socket.
3. Press the power button on the front panel to power on the N4100PRO.

Checking System Status

After making connections on the N4100PRO and powering up, check whether the
system status is normal or has trouble by observing indicators on the front panel
and hard disk trays.

System Status Normal

The system status is normal if:
1. The front panel Power LED glows blue and the WAN LED glows or blinks
green.
2. The HDD Power LED on each HDD tray glows blue.

System Trouble

The system has trouble if:
1. Any LED glows red.
1. The system emits a continuous beeping sound.
If the system has trouble, please refer to
WARNING
Chapter 8:
There are no user serviceable parts inside the N4100PRO. Please contact
38
Troubleshooting.