Lcd Operation (N3200Xxx/N0503) - Thecus N3200XXX Series User Manual

NOTE
LCD Operation
LCD Controls
Use the Down ( ), Up (
▼
view system information and USB copy.
The following table illustrates the keys on the front control panel:
LCD Controls
Icon Function
▼
Down Button
▲
Up Button
Enter

ESC Escape
Display Mode
During normal operation, the LCD will be in Display Mode.
Display Mode
Item
Host Name
WAN/LAN1
LAN2
RAID
System Fan
Temperature
Date/Time
Up Time
The N3200XXX/N0503 will rotate these messages every three seconds on the LCD
display.
NOTE
USB Copy
The USB Copy function enables you to copy files stored on USB devices such as USB
disks and digital cameras to the N3200XXX/N0503 with a press of a button. To use
USB copy, follow the steps below:
1. Plug your USB device into an available USB port on the Front Panel.
2. In Display Mode, press the Enter (
3. The LCD will display "USB Copy?"
You can also change your LCD password using the Web Administration
Interface by navigating to System Management > Administrator
Password. For more on the Web Administration Interface, see Chapter
4: System Management.
(N3200XXX/N0503)

), Enter ( ) and Escape (ESC) keys to operate LCD to
▲
Description
Select the previous configuration settings option.
Select the next configuration settings option.
Enter to display USB copy operation.
Escape to give up USB copy.
Press and hold for 3 seconds to turn off the LCD's backlight. Press
any button to switch the backlight back on.
Description
Current host name of the system.
Current WAN/LAN1 IP setting.
Current LAN2 IP setting.
Current RAID status.
Current system fan status.
Current system temperature.
Current system date and time
The system power on time since last start
If the RAID array is in a degraded state, the LCD display will be stopped
in display mode and show which disk is degraded in the array:
RAID: Degraded [Disk #]

).
49