Table of Contents
Advertisement
S
W
UPER
ORKSTATION 7036A-T User's Manual
Serial Ports
Two serial ports are included on the
serverboard. COM1 is a backpanel
port and COM2 is a header located
near the onboard speaker header.
See the table on the right for pin
defi nitions.
Power LED/Speaker
On JD1 header, pins 1-3 are for a
power LED and pins 4-7 are for the
speaker. Close pins 4-7 with a jumper
to use an external speaker. If you wish
to use the onboard speaker, please
close pins 6-7. See the table on the
right for speaker pin defi nitions.
Universal Serial Bus (USB)
There are four Universal Serial Bus
ports located on the rear I/O panel and
four additional USB headers located
on the serverboard. The headers can
be used to provide front side USB
access (cables not included). See the
table on the right for pin defi nitions.
LAN1/2 (Ethernet Ports)
Two Ethernet ports (designated LAN1
and LAN2) are located beside the VGA
port on the I/O backplane. These ports
accept RJ45 type cables.
Serial Port Pin Defi nitions
Pin #
Defi nition
1
DCD
2
RXD
3
TXD
4
DTR
5
Ground
Power LED/Speaker
Connector
Pin Setting
Pins 6-7
Internal Speaker
Pins 4-7
External Speaker
Rear I/O USB
(USB 0~3)
Pin#
1
+5V
2
PO-
3
PO+
4
Ground
5
N/A
Universal Serial Bus
Pin Defi nitions (USB)
USB6/8
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
N/Key
5-16
Pin #
Defi nition
6
DSR
7
RTS
8
CTS
9
RI
10
NC
Defi nition
Defi nitions
USB7/9
Pin #
Defi nition
1
+5V
2
PO-
3
PO+
4
Ground
5
No connection
Advertisement
Table of Contents
