Basic Operation; Station Search; New Station Creation; Station Preset Memory - Kenwood DPX513WBT Instruction Manual

6-3. Basic operation

Thumbs up
Press and hold the [1] button.
Thumbs down
Press and hold the [2] button.
Song skip
Press the [F].
Pause and play a song
Press the [L] button.

6-4. Station search

You can select the station you want to listen to from
your station list.
1
Press the [1] button.
"SEARCH" appears and enter the Station List mode.
2
Use the [Control knob] to select a sort type.
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
"A-Z": Stations are displayed in alphabetical order.
"By Date": Stations are displayed in date order.
3
Use the [Control knob] to select a station.

6-5. New station Creation

You can search for a desired station. You can register
the displayed station as a new station in your
station list.
1
Press and hold the [1] button.
"NEW STATION" appears and enter the New station
registration.
2
Use the [Control knob] select a search method.
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
- "FROM ARTIST": Searches for a song by the name
of the artist you are listening to.
- "FROM TRACK": Searches for a song by the name
of the track you are listening to.
When you select a search method, a new station
name is created.
3
Use the [Control knob] to select a station.
The broadcast from the selected station is received
and the station is registered in the station list.

6-6. Station preset memory

You can store a station in the memory.
1
Press the [E] or [F] button to select the
station.
2
Press and hold the button ([3] to [5]) to which
you want to assign the selected station.
"STORED" appears and the channel is registered.

6-7. Preset tuning

Recalling a channel from the memory.
Press the button ([3] to [5]) corresponding to
the station you want to listen to.

6-8. Pandora source control

You can turn on/off the Pandora source.
1
Press and hold the [AUDIO] button.
Enter the Function setting mode.
2
Use the [Control knob] to select "INITIAL SET"
> "PANDORA SRC".
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
3
Use the [Control knob] to select a Pandora
source control method.
"ON": Turns on the Pandora source.
"OFF": Turns off the Pandora source.
Exit the Function setting mode
Press and hold the [6] button.
17
|
English