Calling A Number In The Call Log; Speed Dialing (Preset Dial); Registering In The Preset Dial Number List; During A Call - Kenwood DPX513WBT Instruction Manual

15-5. Calling a number in the call log

1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "CALL
HISTORY".
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
3
Turn the [Control knob] to select a name and
phone number.
I : Incoming calls
O : Outgoing calls
M : Missed calls
4
Press the [Control knob].
Make a call.

15-6. Speed dialing (Preset dial)

1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Press number button ([1] to [6]).
3
Press the [Control knob].
Make a call.
Registering a dial number
• You need to register the preset dial number. Refer to <15-7.
Registering in the preset dial number list> (page 37).
15-7. Registering in the preset dial
number list
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Enter the phone number you wish to register.
Enter the phone number with reference to the
following:
<15-2. Calling a number in the phone book> (page
36)
<15-4. Dialing a number> (page 36)
<15-5. Calling a number in the call log> (page
37)
3
Press and hold number button ([1] to [6]).

15-8. During a call

Disconnecting a call
Press the [SRC] button.
Switching to the Private mode
Press the [L] button.
Pressing this knob each time switches between the
private talk mode ("PV TALK") and hands-free talk
mode ("HF TALK").
When the previous source is restored in the Private mode
• Depending on the type of your cell-phone, switching
to the private talk mode may select the source that was
used before commencing the hands-free connection. If
this happens, the source cannot be switched back to the
hands-free talk mode by operating this unit. Operate your
cell-phone to return to the hands-free talk mode.
Adjusting the voice volume during a call
Turn the [Control knob].
37
English |