Direct Access Tuning; Itunes Tagging; Parental Lock Setting - Kenwood DPX513WBT Instruction Manual

18-6. Direct access tuning

(Function of remote control)
You can search for a channel directly by entering its
number.
1
Press the [DIRECT] button on the remote
control.
2
Press the number buttons on the remote
control to enter a channel number.
3
Press the [ENT] button on the remote control.
Canceling the Direct access tuning mode
Press the [6] button on the remote control.
Automatic cancellation
• If you operate no button for 10 seconds, the Direct Access
Tuning mode is automatically canceled.

18-7. iTunes tagging

You can store the tag of the information about the
song being received, and send it to the connected
iPod. You can easily find the song on the iTunes
Store according to the tag sent to the iPod.
1
Press and hold the [6] button.
" " will be indicated on the display when
song information can be registered.
"TAG STORING" is indicated on the display while
a tag is being stored in this unit. "TAG STORED" is
indicated on the display after a tag is stored.
When your iPod is connected to this unit, "TAG
TRANSFERD" is shown on the display and a tag is
sent to the iPod.
Effective use of iTunes
• The song corresponding to the tag sent to the iPod is
indicated in the playlist ("Tagged") of the synchronized
iTunes.
By clicking your desired song in the playlist, you can easily
find it on the iTunes Store and buy it from the iTunes Store.
Number of tags that can be stored
• A fifty song information tags can be stored in this unit.
When a tag has been sent to the iPod, the tag stored in this
unit is cleared.
• The memory usage can be checked by selecting the "TAG
MEMORY" setting mentioned in <18-15. SiriusXM tuner
setting> (page 47).

18-8. Parental Lock setting

You can turn on/off Parental Lock for each channel.
1
Select the SiriusXM Radio source.
Refer to <Source selection> (page 11).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS" >
"CHANNEL LOCK".
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
4
Enter the pass code.
Operation type
Selection of numbers.
Determination of the selected numbers. Press the [Control knob].
Selection of column
Pass code setting
• The pass code is set to "0000" as default.
For how to change the pass code, refer to <18-11. Parental
Lock pass code setting> (page 45).
5
Use the [Control knob] to select "CHANNEL
EDIT".
A category list appears.
When the "CHANNEL EDIT" item is not displayed
• The mature content setting may be turned ON. Refer to
<18-10. Setting Parental Lock for Mature content> (page
44).
6
Use the [Control knob] to select the category
of the channel subject.
The list of the channels in the selected category
appears.
7
Use the [Control knob] to select a channel.
Parental Lock for the selected channel is turned on
and off alternately each time you press the [Control
knob].
"L" is indicated for the selected channel.
"X" is indicated for the channel that cannot be
locked.
Exit the Function setting mode.
Press and hold the [6] button.
Viewing the channel for which Parental Lock is turned on
• If a channel for which Parental Lock is turned on is selected,
a pass code input screen appears. Programs on the selected
channel can be received only when the input pass code is
correct.
Operation
Turn the [Control knob].
Press the [E] or [F].
43
English |