Channel Skip Setting; Clearing The Channel Skip Setting - Kenwood DPX513WBT Instruction Manual

SiriusXM™ Satellite Radio (optional tuner and service required)

18-13. Channel skip setting

You can register the channel you wish to skip.
1
Select the SiriusXM Radio source.
Refer to <Source selection> (page 11).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS" >
"CHANNEL SKIP" > "CHANNEL EDIT"
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
4
Use the [Control knob] to select the category
of the channel.
5
Use the [Control knob] to select the channel.
The selected channel skip setting is turned on and
off alternately each time you press the [Control
knob].
"S" is indicated for the selected channel number.
"X" is indicated for channel numbers that cannot be
selected.
Exit the Function setting mode.
Press and hold the [6] button.
46
|
DPX513WBT
18-14. Clearing the channel skip
setting
You can clear the skip setting for all the selected
channels together.
1
Select the SiriusXM Radio source.
Refer to <Source selection> (page 11).
2
Press and hold the [AUDIO] button.
Enter the Function setting mode.
3
Use the [Control knob] to select "SETTINGS" >
"CHANNEL SKIP" > "CHANNEL CLEAR"
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
4
Use the [Control knob] to select "YES".
Exit the Function setting mode.
Press and hold the [6] button.