Selecting The Bluetooth Device You Wish To Connect; Deleting A Registered Bluetooth Device; Bluetooth Device Registration Test - Kenwood DPX513WBT Instruction Manual

14-3. Selecting the Bluetooth device
you wish to connect
When two or more Bluetooth devices have already
been registered, you need to select the Bluetooth
device you wish to use.
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "SETTINGS"
> "PAIRING" > "PHONE SELECT" (to select the
cell-phone) or "AUDIO SELECT" (to select the
audio player).
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
"(name)" appears.
3
Use the [Control knob] to select an Bluetooth
device.
'*(name)' or '-(name)' appears.
"*": The selected Bluetooth device is busy.
"-": The selected Bluetooth device is on standby.
" " (blank): The Bluetooth device is deselected.
Exit the Bluetooth mode.
Press the [Ú] button.
When no device can be selected
• If a cell-phone is already selected, deselect it, and then
select a different one.
• If you cannot select a device using the audio player,
connect the device with the audio player.
14-4. Deleting a registered Bluetooth
device
You can delete a registered Bluetooth device.
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "SETTINGS" >
"PAIRING" > "DEVICE DELETE".
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
"(name)" appears.
3
Use the [Control knob] to select an Bluetooth
device.
4
Use the [Control knob] to select "YES".
"COMPLETED" appears.
Exit the Bluetooth mode.
Press the [Ú] button.
When a registered device is deleted
• When a registered cell-phone is deleted, its phone Book,
and log are also deleted.
14-5. Bluetooth device registration
test
You can check whether a Bluetooth device can be
registered by operating this unit.
1
Press the [Ú] button.
"BT MODE" appears and enter the Bluetooth mode.
2
Use the [Control knob] to select "BT TEST
MODE".
For how to use the [Control knob], refer to <3-2.
How to select the item> (page 11).
"PLEASE PAIR YOUR PHONE" appears.
3
By operating the Bluetooth device, register
the hands-free unit or audio unit (pairing).
Select "DPX5**WBT" from the list of found units.
4
If "(Bluetooth device name)" appears, proceed
to step 6.
5
Input the PIN code ("0000") in the Bluetooth
device.
6
Use the [Control knob] to select an Bluetooth
device.
When pairing is completed successfully, a
connection test starts automatically.
When the connection test is completed, test results
are displayed on a function basis ("OK": Enabled;
"NG": Disabled).
Display
"PAIRING"
"HF CNT"
"AUD CNT"
"PB DL"
7
Press the [Control knob].
Exit the test mode.
Description
Registration in this unit
Hands-free phoning
Audio playback
Phone Book downloading
English
35
|