■ Reset button
At the right of the front panel, the reset button is designed for rebooting the Managed Switch without turning off and on the
power. The following is the summary table of reset button
Reset Button Pressed and Released
< 5 sec: System Reboot
> 5 sec: Factory Default
2.1.2 LED Indications
The front panel LEDs indicate instant status of power and system status, alarm status, port links and data activity; they help
monitor and troubleshoot when needed.
GS-5220-16S8C LED Indication
GS-5220-16S8CR LED Indication
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
functions:
Function
Reboot the Managed Switch.
Reset the Managed Switch to Factory Default configuration.
The Managed Switch will then reboot and load the default
settings as shown below:
。
。
。
。
。
Figure 2-1-3 and 2-1-4
Figure 2-1-3: GS-5220-16S8C LED at Front Panel
Figure 2-1-4: GS-5220-16S8CR LED at Front Panel
22
Default Username: admin
Default Password: admin
Default IP address: 192.168.0.100
Subnet mask: 255.255.255.0
Default Gateway: 192.168.0.254
show the LED indications of the Managed Switch.