Acl Ports Configuration - Planet GS-5220-16S8C User Manual

4.10.4 ACL Ports Configuration

Configure the ACL parameters (ACE) of each switch port. These parameters will affect frames received on a port unless the
frame matches a specific ACE. The ACL Ports Configuration screen in
The Page includes the following fields:
Object

Port

Policy ID

Action

Rate Limiter ID
 Port Redirect
Figure 4-10-4: ACL Ports Configuration Page Screenshot
Description
The logical port for the settings contained in the same row.
Select the policy to apply to this port. The allowed values are 0 through 255.
The default value is 0.
Select whether forwarding is permitted ("Permit") or denied ("Deny").
The default value is "Permit".
Select which rate limiter to apply on this port. The allowed values are Disabled or
the values 1 through 16.
The default value is "Disabled".
Select which port frames are redirected on. The allowed values are Disabled or a
specific port number and it can't be set when action is permitted. The default
value is "Disabled".
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
Figure 4-10-4 appears.
222