Port Statistics - Planet GS-5220-16S8C User Manual

L2+ 24-port gigabit managed switch with hardware layer3 ipv4/ipv6 static routing
Hide thumbs Also See for GS-5220-16S8C:
Table of Contents

Advertisement

 Management Address
Buttons
: Click to refresh the Page immediately.
Auto-refresh
:
Check this box to refresh the Page automatically. Automatic refresh occurs every 3 seconds.

4.14.6 Port Statistics

This Page provides an overview of all LLDP traffic. Two types of counters are shown. Global counters are counters that refer to
the whole stack, switch, while local counters refers to counters for the currently selected switch. The LLDP Statistics screen in
Figure 4-14-5
appears.
User's Manual of GS-5220-16S8C & GS-5220-16S8CR
7. DOCSIS cable device
8. Station only
9. Reserved
When a capability is enabled, the capability is followed by (+). If the capability is
disabled, the capability is followed by (-).
Management Address is the neighbor unit's address that is used for higher layer
entities to assist the discovery by the network management. This could for
instance hold the neighbor's IP address.
Figure 4-14-5: LLDP Statistics Page Screenshot
308

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-5220-16s8cr

Table of Contents