Basic Operation - Planet Audio P395UAB User Manual

Basic Operation

1. Tuning the unit On / Off
Press any Button to turn the unit on, the display will show a message "PLANET
AUDIO" to indicate it is ready for use. Press and hold the POWER button to turn
the unit off. The display will show a message "GOODBYE".
2. Mode Selection
Press the SRC Button to select Radio Mode. Press the SRC Button to cycle the
Play Mode amoung AUX, RADIO and CD PLAY.
Note: USB & SD mode will only show on the display when a USB flash memory
or SD card is inserted into the USB port or SD port.
3. Loudness Control
Press the SEL button until "LOUD OFF" is shown on the display indicates that
the loudness function is OFF. Turn the volume knob to select between ON or
OFF.
4. Mute Control
Press the POWER/MUT button active or cancel Mute function.
5. Volume
Use the VOL +/- Button to adjust the volume level. The larger the number, the
higher the volume level.
6. Bass/Treble
Press the SEL Button repeatedly until the display shows "BAS 00"/"TRE 00".
Use the VOL +/- Button to adjust. When EQ is ON, bass/treble control is not
available.
7. Balance/Fader
Press SEL Button repeatedly until the display shows "BAL L-R"/"FAD F-R", then
use the VOL +/- Button to adjust the balance between the left & right speakers.
8. Clock
The time clock can be set anytime when the power is on. Press the CLK Button
on the faceplate or remote control once, the time will show on the display.
Then press and hold the button until the hour blinks on the display. Rotate the
VOL knob to set hours, then press the VOL knob for the minutes to blink and
rotate the VOL knob to set.
Press the CLK button again or leave the unit idle for new setting to effect. Press
the CLK button anytime to view the time clock display.
9. Preset Beep Sound Off
Press the SEL button repeatedly until "BEEP OFF" is displayed. Turn the VOL
+/- Button to select "BEEP ON" or "BEEP OFF", then leave the unit idle for
setting to take effect.
10. Preset Equalizer Function
Press the SEL Button repeatedly until "EQ" indication is displayed then rotate
the Volume knob to choose between the EQ sound effects. The Sequence of
equalizer setting will be as follows:
OFF
POP
FLAT
CLASSIC
8
ROCK