Radio Operation - Planet Audio P395UAB User Manual

Radio Operation

1. Choose Radio Band
Press the SRC Button to access the radio function.
The unit comes with five bands- three FM Bands (FM1, FM2, and FM3) and two
MW Bands (MW1, and MW2) selects. Each of the five bands can store up to
six preset stations, for a total of 30 preset memory stations.
2. Radio Tune / Seek Function
In Radio Mode, press and hold the SEEK |<< or >>| Button for 2 seconds, and
the display will show"MANUAL". Then Press the SEEK |<< or >>| Button once
to manually adjust the radio frequency.
3. Tuning
Press the SEEK |<< or >>| Button once the radio will seek the next strong and
clear frequency station. Repeat to seek more stations in your listening area with
a strong signal.
4. Mono/Stereo Reception Control
In FM radio mode, Press the SEL Button until "STEREO" is shown on the dis-
play. Roate the VOL +/- to select STEREO or MONO. Improvement of reception
of distant stations can be done by selecting "MONO" operation which may cut
down some reception noise.
5. Local / Distant Control
In FM radio mode, Press the SEL Button until " DX" is shown on the display.
Roate the VOL +/- to select "LOCAL" or "--DX--".
Local and distance reception setting can facilitate the radio reception, depend-
ing on the location in which the radio is being used.
6. Save Your Preset Stations
There are six numbered preset buttons which can store and recall stations for
each band. While listening to a radio station you would like to save as a pre-
set, press and hold one of the buttons numbered 1-6 until you hear a beep. The
button you pressed is now the pre-set button for that station.
7. Automatic Store/Preset Scan
There are six numbered preset buttons which can store and recall stations for
each band. While listening to a radio station you would like to save as a pre-set,
press and hold one of the buttons numbered 1-6 until you hear a beep. The
button you pressed is now the pre-set button for that station.
A. Automatic Scan & Store
While listening to the FM Radio, press and hold the F/PS Button. The receiver
will automatically scan and save stations of the 3 FM Bands.
While listening to the MW Radio, press and hold the F/PS Button. The receiver
will automatically scan and save stations of the 2 MW Bands.
B. Scan & Preview Saved Stations
Press the F/PS button once and the receiver will scan the radio stations in the
current band.
9