Cd/Mp3/Wma/Usb/Sd Operation - Planet Audio P395UAB User Manual

CD/MP3/WMA/USB/SD Operation

1. Insert / Eject CD
Insert a disc into CD slot with label side up. The disc will be automatically
loaded into the unit, even when it is off or at radio mode. The word "LOAD" will
blink on the display and the CD will play automatically. Press the EJECT Button
to eject the disc from the slot. If the disc is not removed from the slot within 5
seconds, it will automatically be loaded into the slot again. When the disc is
ejected and removed, the unit will automatically switch to radio mode.
While you are playing a disc with MP3 or WMA, The first file in the root folder
will be played. if there is any ID3 information that will be displayed as the file
is playing.
To play MP3/WMA files from a USB flash memory or SD card, insert a USB flash
memory or SD card into the USB port or SD port of the unit. The unit will start
playing MP3/WMA files on the USB flash memory automatically.
If the MP3/WMA files are stored in folders on the USB drive, the unit will start
by playing the first song in the first folder. After playing all the files sequentially
in the first folder, the unit will play sequentially all of the files in the next folder.
The unit will continue playing through all of the folders on the USB drive in this
manner.
If the USB drive has loose files and folders containing files, it will play the loose
files sequentially, then it will play the files in the folders sequentially.
2. Multi-Session CD Reading
This unit can read multi-session CDs. The multi-session reading will be activat-
ed automatically if the player detects a file that is written in multi-session format.
3. Selecting Tracks
Press the SEEK >>| Button to advance CD to the next track. Track numbers
will be shown on the display. Press and hold SEEK >>| to fast forward.
Press the SEEK |<< Button to go to a previous track. Track numbers will be
shown on the display. Press and hold the SEEK |<< Button to fast reverse.
Disc will play normally when the No. 1(play/pause) Button is pressed.
4. Play / Pause CD
Press the No.1/PAU Button to pause the CD. Press this button again to
resume playback.
5. Scanning Tracks
Press the No.2/INT Button to play the first 10 seconds of each track, "INT" will
be displayed on the display. Press this button again to resume playback.
6. Repeat
Press the No.3/RPT Button to repeat the current track. Press it again to cancel.
7. Random
Press the No.4/RDM Button to play all the tracks in random order. "RDM" will
appear on the display. Press this button again to stop random play.
8. Folder Down
-
Press the " 5 " button once to go back one folder.
10