Using The Components; Switching The Devices On/Off - Sennheiser Tourguide System 2020 Instructions For Use Manual

²
¿
CH 03
LINE
MIC

Using the components

Switching the devices on/off

Switching the transmitter on/off
To switch the transmitter on:
Briefly press the
The LC display
then switches to the standard display.
To switch the transmitter off:
Press and hold the
appears on the display.
Note:
Remove the batteries or the accupack when the
transmitter will not be used for extended periods of
time.
Muting the transmitter
To temporarily mute the transmitter's microphone
input:
Set the
The red LED
»
permanently. The
shows any deflection. The transmitter's micro-
phone input is muted.
Note:
The muting function (MUTE) mutes the microphone
»
input
enables a pre-recorded track to be played through the
line input without being disturbed by the tour guide's
microphone. When the track has finished, the guide
can un-mute the microphone and continue talking.
To deactivate the muting function:
Set the
The red LED
level display
indicate the current levels.
ON/OFF
indicates the device name and
ON/OFF
·
MUTE switch to the position "MUTE".
LOW BATT/MUTE ¶
MIC level display
but not the line input ¿. This function
·
MUTE switch back to the right.
LOW BATT/MUTE ¶
and the
button ².
²
button until "OFF"
lights up
no longer
goes off. The
LINE level display
MIC
25