Indications And Displays On The Receiver - Sennheiser Tourguide System 2020 Instructions For Use Manual

Indications and displays on the receiver

RF signal indication
The RF signal indication (tower with radio waves)
on the LC display provides information on the RF
signal reception:
6
Tower with radio waves:
The received RF signal is sufficiently strong.
Tower without radio waves:
No RF signal is being received on the selected channel.
No tower, no radio waves:
The receiver is in stand-by mode. You can, however,
change the settings on the receiver.
Charging control LED
·
During charging, the LED provides information on
the charging status of the receiver's built-in
rechargeable battery.
·
LED lights up red:
The built-in rechargeable battery is being charged.
LED lights up green:
The built-in rechargeable battery is fully charged. The
receiver is now ready for operation.
LED slowly flashes red:
The temperature of the built-in rechargeable battery
is not within the admissible range (3–40 °C). The
charging process is being interrupted until the
temperature is again within the admissible range.
LED lights up yellow/orange:
The built-in rechargeable battery is defective. Please
contact your Sennheiser agent.
16