Fuel-oil or gas connections
Refer to the instructions supplied with the burner.
Electrical connections
Refer to the connection instructions supplied with the control panel..
Maintenance
The operations described below shall only be performed
with the boiler and power supply off.
1 Sweeping
The boiler will only operate efficiently if the exchange surfaces
are kept clean.
The boiler should be cleaned as soon as required and as the
chimney, at least once a year or more, depending upon applicable
regulations and specific needs.
- Unfasten the wing nuts and remove the 4 sweeping doors.
- Cut the power supply to the boiler.
- Remove the upper front panel.
- Remove the retaining upper front crosspiece and then the lower
left and right-hand front panels.
- Remove the lower front panel.
*
14
Remeha P 520
29/08/05 - 300003791-001-B