Table of Contents
Advertisement
HighPoint RAID Management Utilities (HRM) – Web GUI /
CLI
The HighPoint RAID Management Utility Suite, also known as "HRM", includes several user interface
options. The latest version of the Web Management utility user manual, is available from our website.
Windows Operating Systems – Installing the Web GUI from the Software CD.
Click on "Install RAID Management Software".
Select the desired software from the drop down menu, and click on the "OK" button.
Red Hat Enterprise/CentOS, Fedora Core, Open SuSE – Installing the Web-based
Management utility
Linux operating systems that support .rpm packages, allow you to double-click the HighPoint Web RAID
Management .rpm file to start the installation process.
1.
Copy the Web RAID Management package from the RR2760 Software CD, to the desktop of the
Linux operating system. The .rpm file is located in HighPoint RAID Management Software –
\HighPoint
RAID Management Software\WebGUI\RR2xxx_3xxx_None-OBM\Linux\WebGui-
Linux.tbz.
2.
Extract the .tbz file to the desktop, and browse to the appropriate .rpm file (there are 32 and 64-bit
options).
1.
Double click the .rpm file – this should open the operating systems software installer. Enter the
Administrative password when prompted and proceed with installation.
2.
The package can also be installed manually, using a terminal. Log on in as "root", open a terminal, and
browse to the location of the .rpm file. Run the following command:
3.
# rpm -i hptsvr-https-1.4-10.i386.rpm (or hptsvr-https-1.4-10.x86_64.rpm)
Note: The i386 rpm package can also work on 64-bit systems if you have 32-bit runtime libraries installed.
If you use the x86_64 rpm package, please make sure the controller driver has 64-bit ioctl support
27
.
Advertisement
Table of Contents
