Table of Contents
Advertisement
MENU TOOLS
LANGUAGE
A list of the display languages for the OSD Screen is displayed. Move the
directions, or press the
OSD POSITION
Move the
button in the
position of the OSD Screen.
OSD AUTO OFF
Function where the OSD Screen is automatically cleared after it is displayed, when the set time elapses. Move the
button of the monitor in the
function in a range between 10 seconds and 120 seconds, in increments of 5 seconds.
INFORMATION AUTO OFF
Set the display time for the Guidance screen and the Precautions screen (Page 39). The Guidance screen and
Precautions screen are automatically cleared after the set time elapses. Move the
directions, or press the
and 10 seconds, in increments of 1 second. If this function is set to [OFF], the Guidance screen or Precautions
screen will continue to be displayed until the MENU/EXIT button is pressed.
OSD LOCK
Function that prohibits OSD Screen operations in order to prevent adjustments made by mistake. Even while OSD is
locked, brightness and contrast can be adjusted. Operations to set/disable OSD Lock cannot be carried out using the
remote control. Follow the procedure below to set/disable OSD Lock using the buttons on the monitor.
NOTE: • It is possible to move the
not possible to adjust the volume.
• When OSD is locked, operations cannot be carried out using the remote control.
Enabling OSD Lock: Display the OSD Screen, and while [OSD Lock] in MENU TOOLS is selected, hold down the
INPUT/SELECT button, and move the
Disabling OSD Lock: Display a screen such as the one on the right where OSD Lock is enabled, hold down the
INPUT/SELECT button, and move the
RESOLUTION NOTIFIER
Turns the function that displays the Guidance screen for the recommended signal if a signal other than the optimum
resolution is input on or off. For the operation procedure, refer to "OSD Screen Operations" (Page 21).
NOTE: This function is enabled only during D-SUB and DVI-D input. For HDMI1, HDMI2, VIDEO1, and VIDEO2
inputs, the Guidance screen is not displayed, regardless of this setting.
Information
DISPLAY MODE
The information for the signal that is input, as well as the model and serial number are displayed.
Downloaded from ManualMonitor.com Manuals
control button on the remote control to switch the display language.
directions, or press the
directions, or press the
control buttons on the remote control, and set this function in a range between 1 second
button in the
button in the
button in the
English-29
button of the monitor in the
control buttons on the remote control to adjust the
control buttons on the remote control, and set this
directions to adjust the contrast. When OSD is locked, it is
direction.
direction.
button of the monitor in the
Hide quick links:
Advertisement
Table of Contents
