Monitor Settings (Osd Functions) - NEC MultiSync 24WMGX3 User Manual

Monitor Settings (OSD Functions)

This monitor is equipped with OSD (On Screen Display) functions, which enable easy adjustment of the screen.
By using the menus displayed on the screen through the OSD functions, adjustments of the screen, such as brightness, etc.,
can be made.
Configuration of the OSD Screen
The configuration of the OSD Screen is as shown below.
Configuration of group icons (when PC input is selected)
The configuration of each of the group icons is as shown below. For details on the options, refer to the page that is listed for
the explanation on each of the group icons.
PICTURE SETTINGS (P23, 24)
DV MODE
BRIGHTNESS
CONTRAST
SHARPNESS
1
AUTO CONTRAST*
1
WHITE LEVEL*
BLACK LEVEL* 1,2
2
INPUT TYPE*
CR OPTIMIZER
IV MODE
THROUGH MODE
BRIGHTNESS SENSOR
MONITOR SETTINGS (P25)
AUTO ADJUST*
SCREEN SIZE
LEFT/RIGHT*
DOWN/UP* 1,2
HORIZONTAL SIZE*
RESOLUTION SWITCHING*
PHASE* 1
NOTE: When a digital connection is used to connect this monitor to a regular computer (Page 4), the appropriate screen is
displayed automatically. The appropriate screen can also be displayed automatically for analog connections if
settings are specified in Auto Adjust (Page 17).
However, flickering or blurring of the screen may occur depending on the computer. In addition, the screen may not
be displayed properly depending on the input signal. If this occurs, use the OSD functions to make adjustments to
the screen (Page 25). In such cases, information for the screen settings after making adjustments is stored.
Downloaded from ManualMonitor.com Manuals
COLOR CONTROL (P25, 26)
ADJUSTING THE COLOR
1, 2, 3, N
AUDIO SETTINGS (P26, 27)
1
TREBLE
BASS
1,2 BALANCE
SURROUND
1
AUDIO INPUT
1 VOLUME
Group Icon Screen
The selected group icon is highlighted.
Options Screen
The selected option is highlighted,
options, is displayed on the right side of the screen.
Adjustment Screen
, which is used for making adjustments or selections relating to the
selected option, is displayed on both sides of the screen.
PIP SETTINGS (P27)
PIP ON/OFF
PIP SIZE
PIP POSITION
TOOLS (P27, 28)
INPUT SKIP
AUTO INPUT SWITCHING
DVI EDID SELECT*
OFF TIMER
LED BRIGHTNESS
DDC/CI
SIDE BORDER COLOR
ECO METER
ALL RESET
English-20
, which is used for selecting other
MENU TOOLS (P29)
LANGUAGE
OSD POSITION
OSD AUTO OFF
INFORMATION AUTO OFF
OSD LOCK
RESOLUTION NOTIFIER
INFORMATION (P29)
DISPLAY MODE
3
*1: For D-SUB input only
*2: For DVI (AV) input only
*3: For DVI input only