Off Timer - NEC MultiSync 24WMGX3 User Manual

AUTO INPUT SWITCHING
Function that automatically selects a socket with an input signal in cases where there are multiple inputs.
The selected socket can be confirmed in Information on the OSD Screen.
ON: When there is no longer an input signal from the socket that is currently displayed, the display automatically
changes if a signal from another socket is input.
OFF: Automatic switching of the input signal display is not performed.
NOTE: • This function is supported only for PC connections (DVI or D-SUB connection).
• Although it is possible to use a conversion cable or conversion connector to input a PC signal for HDMI1,
HDMI2, VIDEO1 or VIDEO2, the Auto Input Switching function is not enabled for such inputs.
In this case, press the INPUT/SELECT button to switch the input.
DVI EDID SELECT
Select the input mode for the DVI input socket.
PC (Default setting): For when connecting a computer to the DVI input socket.
AV: For when connecting a game console or DVD player to the DVI input socket.
NOTE: • Operations are possible even when [NO SIGNAL] is displayed on the screen (Page 34).
• Supported for DVI-D input only.

OFF TIMER

Function that automatically turns off the power when the set time has elapsed after the power of this equipment is
turned on. Move the
control and set OFF TIMER in a range between 1 hour and 24 hours, in increments of 1 hour. This function is
effective in reducing energy consumption, as it automatically turns off the monitor even when you forget to turn the
power off.
NOTE: If OFF TIMER is set, the power automatically turns off when the set time elapses, even when the monitor is
in use.
LED BRIGHTNESS
The adjustment bar (0.0% to 100.0%) is displayed. Move the
control buttons on the remote control to adjust the brightness of the power LED.
DDC/CI
Function that limits various operations through DDC/CI (Page 45) communication. Move the
in the directions, or press the
on or off.
SIDE BORDER COLOR
Adjust the color of the areas on both sides of the monitor where nothing is displayed when Screen Size is set to Aspect.
Move the button of the monitor in the
a color from among R, G, and B, and press the buttons in the
ECO METER
The power-saving effects are displayed.
Energy-saving power 1: The integrated power-saving effects for when the power is on are displayed in terms of
electric energy consumption (Wh).
Energy-saving power 2: The total integrated power-saving effects, including for when the power is off and when the
Power Management function is in operation, are displayed in terms of electric energy consumption (Wh).
ECO meter display:
OFF (Default setting): The ECO meter is not displayed.
ON: The ECO meter is displayed in the bottom right corner of the screen. The power-saving effect is displayed
in terms of electric power (W).
Transparency of ECO meter: The opacity of the ECO meter can be adjusted.
NOTE: • If the electric energy consumption (Wh) display is reset, the display for both Energy-saving power 1 and
Energy-saving power 2 returns to [0] Wh.
• Power-saving effects can be expected based on settings for IV MODE, CR OPTIMIZER and BRIGHTNESS.
• This function does not support electric power consumed through audio volume.
• The values for reduced electric energy consumption (Wh) and electric power (W) are rough indications.
[ALL RESET]
Settings for DV MODE, BRIGHTNESS, CONTRAST, SHARPNESS, WHITE LEVEL, BLACK LEVEL, CR
OPTIMIZER, IV MODE, INPUT TYPE, MONITOR SETTINGS, COLOR CONTROL (1, 2, 3 only), AUDIO CONTROL,
PIP CONTROL, OSD SCREEN DISPLAY POSITION, OSD AUTO OFF, OFF TIMER, INFORMATION AUTO OFF,
LED BRIGHTNESS, and SIDE BORDER COLOR can be restored to their default settings with [ALL RESET].
Follow the instructions on the screen to carry out reset processing.
Downloaded from ManualMonitor.com Manuals
button of the monitor in the
control buttons on the remote control, and turn DDC/CI communication
directions, or press the
English-28
directions, or press the
button in the directions, or press the
control buttons on the remote control, select
directions to adjust each of the colors.
control buttons on the remote
button of the monitor