Rear Panel - NEC MultiSync 24WMGX3 User Manual

Rear Panel

1
Video/Audio Input (VIDEO2)
Connect a commercially available audio cable from an
imaging device output to this input.
2
Video/Audio Input (VIDEO1)
Connect a commercially available audio cable from an
imaging device with a component video output (D Terminal)
to this input.
3
Optical Digital Audio Output
Outputs the optical digital audio signal.
Connect a cable to an audio amplifier etc. from this output.
This socket outputs HDMI1 and HDMI2 audio only.
Use the analog audio output to send out the other types of
audio signals.
4
Main Power Switch
|: On
O: Off
The main power switch is ON when the monitor is shipped.
5
Anti-Theft Lock Hole
An anti-theft lock (by Kensington) can be installed.
6
Power Input Socket
Connect a power cable to this input.
7
Cable Space
Excess cables can be tucked inside the space.
8
Analog Audio Output
Outputs the audio signal specified on the monitor.
Connect a cable to an audio amplifier etc. from this output.
Can output audio for PC, HDMI and video.
Downloaded from ManualMonitor.com Manuals
9
PC Audio Input
Connect a commercially available audio cable from a
computer output to this input.
10 Signal Input (D-Sub)
Connect a mini D-Sub 15 pin cable.
11 Signal Input (DVD-D)
Connect a DVI-D cable.
12 Rear cover
Covers up the sockets and keeps the rear tidy.
HDMI Input (HDMI1 and HDMI2)
13
Connect an HDMI cable from an imaging device with an
HDMI output to this input.
(The upper socket is 1 and the lower is 2).
14 Component Input (VIDEO1)
Connect a commercially available video cable from an
imaging device with a component video output (Y/Pb/Pr) to
this input.
15 Video Input (VIDEO2)
Connect a commercially available video cable from an
imaging device output to this input.
(S-Video Input has priority over this input).
16 S-Video Input (VIDEO2)
Connect a commercially available S-Video cable from an
imaging device with an S-Video output to this input.
Main Power Switch
Main Power Switch is located at the right back of the
monitor when you are facing the front of the monitor.
The main switch is ON when the monitor is shipped.
Turn main switch OFF when the monitor will not be in use
for a prolonged period.
English-6