Repeat Timer - NEC PlasmaSync 42XM5 PX-42XM5G User Manual

PROGRAM TIMER
This sets the day and time at which the power will be
switched ON/OFF as well as the input mode.
Example 1: Setting so that the power will be switched
on at 8:30 A.M., Monday, displaying RGB2 source,
and switched off at 10:30 A.M.
On "TIMER" menu, select "PROGRAM", then press the
MENU/ENTER button.
The "PROGRAM TIMER" screen appears.
Adjust the items.
Use the LM and
Each mode switches each time the ZOOM
pressed.
Depending on the selected INPUT or FUNC., press the
MENU/ENTER button to make advanced settings.
DAY
1 MON
2 —
3 —
4 —
5 —
6 —
7 —
8 —
9 —
10 —
Example 2: Setting so that the power will be switched
on at 8:00 A.M., Monday, displaying the VIDEO1
input, display the RGB1 input at 9:00 A.M., display in
WHITE at 10:00 A.M., then switched off at 11:00 A.M.
8:00
PROGRAM 1
ON
PROGRAM 2
PROGRAM 3
DAY
1 MON
2 MON
3 MON
4 —
* To perform a continuous program, set the OFF time only
for the last item.
Information
PROGRAM TIMER settings
DAY: Set the day of the week (e.g. Sunday).
ON (hour, minutes): Set the time at which the power
will be turned on in the 24-hour format.
OFF (hour, minutes): Set the time at which the power
will be turned off in the 24-hour format.
INPUT: Set the input mode that will be displayed when
the power is turned on from "VIDEO1~3", "DVD1~2",
"RGB1~3" and "MULTI".
FUNC.: Set the function that will be activated after the
power is turned on from "ORB.", "INV.", "WHITE",
"WIPER" and "REP.1~3".
"REP.1~3" cannot be selected when INPUT is set.
To reset the program
Align the cursor with the DAY field that you wish to
reset, then press the CLEAR/SEAMLESS SW button.
To reset the data
Align the cursor with the field (ON/OFF/INPUT/
FUNC.) that you wish to reset, then press the CLEAR/
SEAMLESS SW button.
Downloaded From TV-Manual.com Manuals
buttons to move the cursor.
PROGRAM TIMER
ON OFF INPUT FUNC.
INV.
08 : 30 10 : 30 RGB2
- - : - - - - : - - — —
- - : - - - - : - - — —
—
- - : - - - - : - - —
- - : - - - - : - - — —
- - : - - - - : - - — —
—
- - : - - - - : - - —
- - : - - - - : - - — —
- - : - - - - : - - — —
—
- - : - - - - : - - —
SEL. ZOOM ADJ. EXIT OK
9:00 10:00
VIDEO1
RGB1
WHITE
PROGRAM TIMER
FUNC.
ON OFF INPUT
08 : 00 - - : - - VIDEO1 —
—
09 : 00 - - : - - RGB1
10 : 00 11 : 00 — WHITE
—
- - : - - - - : - - —
Special characters in the PROGRAM TIMER
screen
When the setting item includes gray indication, it does
not function under the timer's setting.
/ button is • An asterisk "*" in the DAY field
An asterisk "*" means "every" or "everyday". For
example, "*FRI" means "every Friday". If you enter
"*" only, it means "everyday".
• A hyphen "-" in the ON field or OFF field
You have to set at least the ON field or OFF field to
activate the program timer.
• A hyphen "-" in the INPUT and FUNC. field
A hyphen "-" in the INPUT field means the last mode.
When you set "REP.1~3" in the FUNC. field, the
INPUT field is set to "-".
To set MULTI INPUT
• Set the INPUT field to "MULTI", then press the
MENU/ENTER button.
The "MULTI SCREEN SETTING" will appear on
the screen.
• Use the L and M buttons to select "MULTI MODE",
then use the
11:00
"SINGLE", "SIDE BY SIDE1~3" and "PICTURE
IN PICTURE (BOTTOM LEFT~TOP LEFT)".
• Use the L and M buttons to select "MAIN"/ "SUB"
and "LEFT"/"RIGHT", then use the
OFF
to choose from "VIDEO1~3", "DVD1~2" and
"RGB1~3".
PICTURE IN PICTURE
PROGRAM TIMER
MULTI SCREEN SETTING
MULTI MODE
: BOTTOM LEFT
INPUT MODE
MAIN
SUB
SEL.
To set "REP.1~3" to the FUNC.
• Set the function to "REP.1", "REP.2" or "REP.3", then
press the MENU/ENTER button.
The "REPEAT TIMER" screen will appear on the
screen.
• Use the
"MULTI" and "VIDEO-W", then adjust the items.
• When you set FUNC. to "REP.1", "REP.2" or
"REP.3", you can set "SINGLE", "MULTI" and
"VIDEO-W". However, only one of these works
depending on the settings of AUTO ID and DIVIDER.
See "REPEAT TIMER" on page En-30 for details
for the above settings.

REPEAT TIMER

This function enables you to display 2 input modes at the
set time alternately.
Example: Setting to display "VIDEO1" for 10 minutes
and "DVD1" for 15 minutes alternately.
On "TIMER" menu, select "REPEAT", then press the
MENU/ENTER button.
En-30
PROGRAM TIMER
DAY ON OFF INPUT
1 MON 08 : 30 10 : 30 RGB2
2 TUE - - : - - 18 : 15 —
3 SAT 08 : 30 12 : 15 VIDEO1
4 *FRI 08 : 30 10 : 00 DVD1
- - : - - - - : - - —
5 —
6 SAT 08 : 30 12 : 15 —
7 * 15 : 30 16 : 00 RGB1
- - : - - - - : - - —
8 —
and buttons to choose from
SIDE BY SIDE
MULTI SCREEN SETTING
MULTI MODE
: SIDE BY SIDE1
INPUT MODE
: RGB1 LEFT
: VIDEO1 RIGHT
ADJ. EXIT RETURN SEL.
and buttons to choose from "SINGLE",
FUNC.
INV.
—
WHITE
—
—
REP.1
—
—
and buttons
PROGRAM TIMER
: RGB1
: VIDEO1
ADJ. RETURN
EXIT