Sharp MZ-80P6 Instruction Manual page 20

Hide thumbs Also See for MZ-80P6:
Table of Contents

Advertisement

-
-----------------------------
--
--
Control code
Function
ESC + 10H + n
ESC + 11 H + n1 +
n2+·····+ n k+ NUL
ESC + 12H + n
ESC+13H+n1+
n2 + ..... + nk + NUL
It depends on (n) which is determined by values 01 H - FFH and
makes the one line paper feed pitch n/48H.
• It is valid in this mode only when using the (ESC + 02H) mode.
• Paper feed p itch is 1/6 inch when not set in th is mode.
Positions (lines) for vertical tabulation are set with n1, n2, ..... nk.
NUL as NULL code (OOH) is considered the end mark.
• Set positions (k) are within 128.
• Paper feed pitch of one line is determined by (ESC + 10H + n).
• Positions for vertical tabu lation shou Id not exceed the length of
one page (nu m ber of lines).
• Paper feed is by single line when the VT code is input, if no
vertical tabu lalion is
set.
Number of lines printed on each page is determined by n.
• n must be with in 128.
• Paper feed pitch of one line is determined by (ESC + 10H
+
n).
• There are 66 lines per one page when th is mode is not set.
Horizontal tabu lation positions (characters) are set for k positions
with n1 , n2, ..... nk. NUL is considered end mark with NUL code
(OOH).
• Set positions (k) are within 136.
• In the normal size printing mode, that command is ignored when
try ing to set the tabu lat ion for more tha n 80 characters.
• I n the reduced size printing mode, that command is ignored when
trying to set the tabulation for more than 136 characters.
• I t ignores the HT code when the horizontal tabu lation positions
are not set.
• It ignores the HT code when in the double size printing mode.
ESC + 18H + ( DATA
It prints in order according to each bit pattern of the.data n1 , n2, .....
SIZE) + n1 + n2 + ... ..
nk of the numbers determined by the (DATA SIZE). It is called bit
image pri nti ng.
+
nk
• (DATA SIZE) is determined by 2 bytes and must be input in the
order of lower 8 bits and upper 8 bits.
• I t makes data n1 '" nk 8-bit data.
• It makes data size a maximum of 480 when in the normal size
printing mode.
• It makes data size a maximum of 952 when in the reduced size
printing mode (S I mode).
• This bit image printing mode is cancelled after one line is printed.
• Vertical and horizontal tabu lation are cancelled if they were set
before the bit image printing mode is determined.
17

Advertisement

Table of Contents
loading

Table of Contents