Tape - Recording; Recording Your Favorite Cd Tracks On A Tape; Cd-Tape Synchro Recording - Sony MHC-GNZ9D Operating Instructions Manual

Tape – Recording
Recording your favorite
CD tracks on a tape

— CD-TAPE Synchro Recording

You can record a whole disc (VIDEO CD and
CD) on a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Use buttons on the unit for the operation.
1
Load a recordable tape into deck B,
then press TAPE A/B repeatedly to
select "TAPE B".
2
Press nN (or H on the remote)
repeatedly to select recording side,
then press x.
If you select both sides recording or front
side recording, press nN (or H on the
remote) to light up the N indicator, then
press x. If you record on the reverse side,
press nN repeatedly to light up the n
indicator, then press x.
3
Press DIRECTION repeatedly to select
"g" to record on one side. Select
"j" (or "RELAY") to record on both
sides.
4
Press DVD and load a disc you want to
record.
If you have already loaded the disc, press
DISC 1 – 3 to select the disc. If the selected
disc automatically starts playback, press x
twice to cancel Resume Play.
5
Press CD SYNC.
Deck B stands by for recording.
"SYNC" lights up and "REC" flashes.
6
Press REC PAUSE/START.
Recording starts.
To stop recording
Press x.
Notes
• CD Synchro Recording is not available with DVDs,
DATA CDs and DATA DVDs.
• You cannot listen to other sources while recording.
• When you press CD SYNC in step 5, the surround
effect may automatically change (see "Selecting the
surround effect" on page 55).
• If the play mode is set to Shuffle Play, Program Play
or Repeat Play, it automatically switches to Normal
Play in step 5.
• When you record from a VIDEO CD, playback with
PBC functions is automatically canceled.
• The sound cuts off for a moment during recording
when:
– you connect or disconnect the microphones
– you turn on or off the karaoke mode
• CD SYNC only works in DVD function.
• Do not eject the tape during recording, as this may
cause irreparable damage to the tape and the tape
deck.
Tips
• If you select both sides recording and the tape
reaches the end of the front side part-way through a
track, the entire track is recorded again from the
beginning of the reverse side.
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
GB
53