Specifications - Sony MHC-GNZ9D Operating Instructions Manual

Specifications

Main unit
Amplifier section
MHC-GNZ9D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
Subwoofer:
MHC-GNZ8D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
Front speaker:
Center speaker:
Surround speaker:
MHC-GNZ7D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
MHC-GNZ5D
The following measured at AC 120, 127, 220,
230 – 240 V, 50/60 Hz
Continuous RMS power output (reference)
Inputs
TV/SAT IN (audio) (phono jacks)
VIDEO INPUT VIDEO (phono jack)
115 + 115 watts
(6 ohms at 1 kHz, 10%
THD)
50 watts (6 ohms at 1 kHz,
10% THD)
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
170 watts (4 ohms at
100 Hz, 10% THD)
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
40 watts (6 ohms at 1 kHz,
10% THD)
40 + 40 watts
(6 ohms at 1 kHz, 10%
THD)
100 + 100 watts
(6 ohms at 1 kHz, 10%
THD)
50 + 50 watts
(6 ohms at 1 kHz, 10%
THD)
1)
:
voltage 450/250 mV,
impedance 47 kilohms
1)
:
1 Vp-p, 75 ohms
VIDEO INPUT AUDIO (phono jacks)
2)
MIC 1/MIC 2/MIC (phone jacks):
Outputs
TV/SAT OUT (audio) (phono jacks)
VIDEO OUT (phono jack):
S VIDEO OUT (4-pin/mini-DIN jack)
COMPONENT VIDEO OUT
DIGITAL OPTICAL OUT
jack, rear panel)
Wavelength
PHONES (stereo mini jack):
FRONT SPEAKER:
4)
SURROUND SPEAKER
4)
CENTER SPEAKER :
SUBWOOFER/SUBWOOFER CONTROL
6)
SUBWOOFER OUT
1)
Except for MHC-GNZ5D
2)
MHC-GNZ5D only
3)
MHC-GNZ7D/GNZ5D only
4)
MHC-GNZ9D/GNZ8D only
5)
MHC-GNZ9D only
6)
MHC-GNZ8D/GNZ7D only
1)
:
voltage 250 mV,
impedance 47 kilohms
sensitivity 1 mV,
impedance 10 kilohms
1)
:
voltage 250 mV,
impedance 1 kilohm
max. output level
1 Vp-p, unbalanced, Sync
negative, load impedance
75 ohms
1)
:
Y: 1 Vp-p, unbalanced,
Sync negative,
C: 0.286 Vp-p, load
impedance 75 ohms
1)
:
Y: 1 Vp-p, 75 ohms
P , P : 0.7 Vp-p, 75 ohms
B R
3)
(Square optical connector
660 nm
accepts headphones of
8 ohms or more
Use only the supplied
speaker SS-GNZ9D.
:
Use only the supplied
speaker SS-RS9D for
MHC-GNZ9D, SS-RS8D
for MHC-GNZ8D.
Use only the supplied
speaker SS-CT9D for
MHC-GNZ9D, SS-CT8D
for MHC-GNZ8D.
5)
:
Use only the supplied
speaker SA-WG9D.
voltage 1 V,
impedance 1 kilohm
continued
GB
81