Setting The Clock; Performing The Quick Setup - Sony MHC-GNZ9D Operating Instructions Manual

Setting the clock

1
Press ?/1 to turn on the system.
2
Press TIMER MENU.
3
Press M or m repeatedly to set the hour.
4
Press ENTER.
5
Press M or m repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press TIMER MENU.
2
Press M or m to select "CLOCK SET", then
press ENTER.
3
Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
(page 63).
14 GB
Performing the Quick
Setup
You can set the initial settings of "OSD", "TV
TYPE" and "DISTANCE" (MHC-GNZ9D/
GNZ8D only) step by step.
After performing the Quick Setup, the system is
ready for playing back of movies, music CDs,
etc. To perform further speakers settings, see
"Speaker settings" on page 43.
The Asian model is used for illustration
purposes only.
For MHC-GNZ9D/GNZ8D
1
Turn on the TV and select the video
input.
2
Press ?/1 to turn on the system.
3
Press FUNCTION + or – repeatedly (or
DVD on the unit) to switch the function
to DVD.
The guide message appears on the TV
screen.
Notes
• When a disc is in the system or the disc tray
opens, the guide message does not appear on the
TV screen. Remove the disc.
• When you press CLEAR, the guide message
disappears. When you need to perform the
Quick Setup, see "To recall the Quick Setup
display" (page 16).
• Disconnect the headphone and microphones
when you perform the Quick Setup. You cannot
operate steps after 9 with the headphone or
microphones connected.
4
Press ENTER.
"LANGUAGE SETUP" appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
The language you select in "LANGUAGE
SETUP" is for "OSD", "MENU" and
"SUBTITLE" (page 38).
ENGLISH
ENGLISH
CHINESE 1
CHINESE 2
THAI