Table of Contents
Advertisement
"The CD starts playing:
To
:
Press"
Stop recording
us
Pause recording...
Wb...
@ on the CD player
Dil on the CD player
Stop CD play
Pause CD play
To stop recording
Press Mi & on deck B.
Adjusting the volume or DBFB will not
affect the recording level
Recording a CD:
Specifying Tape
Length (time edit)
POWER-+ON
6
CONTINUE
2
9
yy OO
v
[on
a!
Ebsotp
1
—
4
STaeeee)
gies
aml
8,11
7
1 Press FUNCTION repeatedly until "CD"
appears in the display.
2 Press & OPEN/CLOSE and place a CD.
Then, press
& OPEN/CLOSE again to
close the CD tray.
3 Press EDIT.
"TIME EDIT" appears in the display.
4 Press DDT + or - KK (or press Pl or .
K¢é4 on the remote) to designate the
tape length.
Choose the indication for tapes of a
corresponding minute length. Choose
"HALF" if you want the CD player to
play just half the total playing time of
the CD.
As you press Di + or - KK, the
indication changes as follows:
C-46 <——— C54
HAL eG (23.00)
ao
\nc.90---2C-74-—e 60
(45.00)
(37.00} . (30.00)
You cannot select "HALF" when you
want to record CD which has more than
20 tracks.
5 Press EDIT.
The CD player determines the tracks to
be recorded on side A automatically.
Tracks to be recorded on side A
Total playing time on side A
6 When you want to record on both sides,
press EDIT again.
The CD player determines the tracks to
be recorded on side B.
When you want to record only on side
A, press Ml on the CD player to stop the
indication from flashing.
7 Press
a and insert a blank tape into
deck B-with'thé side you-want:to record
.,.on facing forward,
'
'Make sure the'tabs on the cassette have
not been. removed:
8 Press @ (C= is linked and iaesieed at
the same time). on deck B.
"
Recording starts.
9 Press Pill on the CD piaver.
The determined tracks for side'A
starts
playing and are recorded: After those
tracks have been recorded, the unit will
pause.
;
1 0 Set the tape to the beginning of side
B.
Take the tape out and insert the tape
with side B facing forward.
11
Press @ (> is linked and depressed
at the same time) on deck B.
Recording starts.
1 2 Press Dll on the CD player.
The determined tracks for side B starts
playing and are recorded.
To stop recording
Press li & on deck B.
To check the order
Press CHECK repeatedly.
Each time you press CHECK, the number
of the programmed tracks appear in the
display.
To cancel time edit
Before you press EDIT on step 5, press ll
on the CD player to cancel. After you
pressed EDIT on step 5, press CONTINUE.
To select the desired tracks
beforehand
You can place priority on some tracks to be
recorded by selecting them before
programming (only up to 20 tracks). See -
"Playing Tracks in the Desired Order
(programme play)".
To activate DOLBY NR
When you want to reduce the hiss noise in
low-level high-frequency signals, press
DOLBY NR
so that the lamp on that button
lights up after step 7.
Chapter 4: the Tape Player
Advertisement
Table of Contents
