Table of Contents
Advertisement
> continued
4 when you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR button so that
"DOLBY NR B" appears in the display.
5 Press O REC.
Be sure to press the button firmly and
swiftly.
Recording starts.
6 Press CD >.
The CD player starts playing.
You can program the CD before playing
(See "Playing Tracks in the Desired
"
Order (program play)'").
To
Press
——
Stop recording
o/s
Pause recording
00 on the tape player
Stop CD play
O on the CD player
Pause CD plav
00 on the CD player
To record with the surround effect
Press S-SURROUND so that "SUR {ltt} "
appears in the display.
Notes
e While recording, do not rewind or fast-
forward on the deck A. This causes an
uneven sound to be recorded.
e Make sure the tape player stops when
vou turn off the unit.
Recording a CD:
Selecting tape Length
(tape select edit)
You can have the stereo system select and
indicate the most suitable tape length for
the recording each disc automatically.
You cannot use "tape select edit" for discs
which contain 21 tracks or more.
SYSTEM
POWER >ON
14 | Chapter 4: the Tape Player
1 Press FUNCTION repeatedly until
"CD" appears in the display.
2 Press
& OPEN and place a CD on the
tray.
Make sure the playing position indicator
in the display is lit under the disc
number of the CD you want to record.
3 Press EDIT on the remote.
"TAPE SELECT" appears in the display
and the player divides the selections
automatically.
Then the display changes as follows:
@PnocaaMe
`
JIJI
JY
Pevyt ft
|
:
a
ae a e
A
pahag
tao
a
ti
PROGAM i o ,
l
pabbdy
r
1
Hi
e Ee
>
flashing
4. Press 0/4 and insert a blank tape of
the indicated length (or longer) into
deck B with the side you want to record
on facing forward.
Make sure the tabs on the cassette have
1 0 1 2
r
not been removed.
5 When you want to reduce the hiss noise
in low-level high-frequency signals,
press DOLBY NR button so that
"DOLBY NR B" appears in the display.
6 Press O REC.
Be sure to press the button firmly and
swiftly.
"REC" appears in the display.
Recording starts.
7 Press CD E> (or CD © on the remote).
The CD player starts playing the tracks
to be recorded on side A.
8 Set the tape to the beginning of side B,
then press O REC.
Be sure to press the button firmly and
swiftly.
9 Press CD œ> {or CD [> on the remote).
The CD player starts playing the tracks
to be recorded on side B.
To stop recording
Press 0/8.
To check the order
Press CHECK on the remote.
To cancel tape select edit
Press CONTINUE on the unit.
eS
ee
|
Recording a CD:
Specifying Tape
Length (time edit)
You can have the stereo system create
programs based on the tape length.
The CD player makes programs that will fit
the tape length. For example, if you use a
46-minute tape to record a 50-minute CD,
the CD player will automatically choose
tracks that will fit within the 46-minutes,
filling as much of the tape as possible. The
player will not program those tracks
beyond track number 20.
SYSTEM
POWER > ON
10,12
CONTINUE
9,113 2
1 Press FUNCTION repeatedly until
"CD" appears in the display.
2 Press & OPEN and place a CD on the
tray. Make sure the playing position
indicator in the display is lit under the
disc number of the CD you want to
record.
3 Press
0/8 and insert a blank tape into
deck B with the side you want to record
on facing forward.
Make sure the tabs on the cassette have
not been removed.
Advertisement
Table of Contents
