ProLights DTD no. 521-7135 User Manual page 32

10
3.3 Menu structure
3.4 Operation in Stand Alone mode
In this mode, the unit is set as Master. In this operation mode the unit independently runs through its show
program:
• Press the FUNC button so many times until the display shows [AUN ] (fig.5).
• Select, by using the Up and Down buttons, the desired function as shown in the following table.
• To confirm, press the button ENTER.
DIAMOND152
UP
DOWN
FUNC
UP
DOWN
AUN
ENTER
Sod
Aud
Sop
AUP
SoN
000
ENTER
512
SLA
ENTER
Fig.5