Exposure Setting; Exposure Mode - JAI GO-5000M-PMCL User Manual

The following table shows Width and Height in the binning modes.
Binning OFF 1
Binning ON 2
Binning ON 4
Note: Binning ON is available for only GO-5000M-PMCL.
*1 Roundup after the decimal point
*2 Number of TAP
*3 Round down after the decimal point
*4 Compensation coefficient
*5 Refer to the width value on the above table.
*6 Refer to the height value on the above table.
*7 Maximum frame rate at the full image size
8.2.

Exposure setting

This section describes how to set the exposure settings.
Table-17 Exposure setting
Command name

Exposure Mode

Exposure Time
Exposure Time Raw
Exposure Auto
8.2.1 Exposure Mode
The exposure mode set the way of the exposure. There are three ways.
Table – 18 Exposure mode
Exposure Mode setting
OFF
Timed
Trigger Width
If Exposure Mode is set at Timed, the exposure operation can be selected as follows by setting Trigger
Option
Table - 19 Trigger option
Trigger Option setting
OFF
RCT
GO-5000M-PMCL / GO-5000C-PMCL
*5
Width
Mono Color
8 ～ 2560
4 ～ 1280 -
2 ～ 640 -
Parameter
Off
Timed
Trigger Width
10～Max. Exposure time[us]
10～Max. exposure time[us]
Off
Continuous
Exposure operation
No exposure control (free-running operation)
Exposure operation at the value set in Exposure Time. Setting value is usec unit.
・If Trigger Mode setting is OFF, the camera is in free-running operation.
・If Trigger Mode setting is ON, the exposure operation depends on the setting of
Trigger Option.
The exposure is controlled by the pulse width of the external trigger.
・Trigger Mode is forced to ON.
Exposure operation
Timed (EPS) mode
RCT mode
*6
Height
Mono Color
1 ～ 2048 2 ～ 2048
1 ～ 1024 -
1 ～ 512 -
Shutter control is not available.
The exposure time depends on the frame rate.
The exposure is set by ExposureTime.
The exposure is controlled by the input trigger
pulse width.
Exposure time(float)
Exposure time(integer)
Disable the exposure auto
Enable the exposure auto
- 42 -
Description