Gain Control Range for
Gain
Gain
Setting
Amplitude
Value
x50.56
1600
x16
x7.15
x3.16
100
x1
x0.45
9.2.3
Gain Selector
The following parameters can be set.
Monochrome:
Color:
9.2.4
Gain
The range for adjustment is as follows.
Monochrome:
Color:
9.2.5
Gain Raw
The range for adjustment is as follows.
Mono:
Color:
9.2.4
Gain Auto
This provides automatic control of the gain level.
This is controlled by the command JAI ALC Reference.
There are three modes.
OFF:
Continuous:
The following detailed settings are also available.
ALC Speed:
Gain Auto Max:
Gain Auto Min:
ALC Reference:
GO-5000M-PMCL / GO-5000C-PMCL
Gain
Monochrome
Setting
Value
Master
24dB
1600
100
0dB
Fig.25
Digital All
Digital All/Digital Red/ Digital Blue
Digital All: 1 ~ 16 (x1 (0dB) ~x16 (+24dB))
Digital All: 1 ~ 16 (x1 (0dB) ~ x16 (+24dB))
Digital Red: -0.4467 ~ 5.6235 (-7dB ~+15dB)
Digital Blue: 0.4467 ~ 5.6235 (-7dB ~+15dB)
Gain Raw Digital All:100 ~ 1600 (0dB~24dB)
Gain Raw Digital All:100 ~ 1600 (0dB~24dB)
Gain Raw Digital Red / Gain Raw Digital Blue :-4533~28400
Adjust manually.
Operate the auto gain continuously
The rate of adjustment of GainAuto can be set (common with
Exposure Auto)
The maximum value of GainAuto control range can be set
The minimum value of GainAuto control range can be set
The reference level of Gain Auto control can be set (common with
Exposure Auto)
Gain
Gain Control Range for Bayer Color
Magnification
Master
39dB
X89.12
24dB
X16
X7.15
15dB
X5.62
X1
0dB
X0.45
-7dB
Gain control
- 56 -
Gain Setting Value
(Magnification)
R&B
Red
Blue
28400 (X5.62)
15dB
0dB
0 (X1)
-7dB
-4533 (X0.45)
28400 (X5.62)
15dB
0dB
0 (X1)
-7dB
-4533 (X0.45)