Table of Contents
Advertisement
UB335ZH.book Page 76 Friday, March 17, 2006 4:35 PM
Copying Systems
Occasionally you might want to copy and rename a system to highlight one group
over another.
One system might be called City - Fire and the same system City - PD with
adjustments to data within.
This lets you quickly locate the desired set of data.
To copy a system including all settings, groups, and channels:
[MENU]
Program System
Select the existing system
Copy System
New Sys Name?
Enter your new name using the Scroll Control and [4] and [6] to traverse the
display and enter characters. Press
Deleting Systems
[MENU]
Program System
Select the existing system
Delete System
Confirm Delete?
Yes="E" / No= "."
Important: Deleted systems cannot be restored. You must re-enter them.
Programming Sites
This section covers settings that apply to trunked radio site. You must program at
least one site for each trunked radio system. When you program multiple sites, all
sites share the same channel groups and channels within the system.
Note: You can only program one site in an EDACS SCAT and LTR system.
Setting the Site Name
Each site name can be up to 16 characters. Abbreviate as necessary to fit. The
site name alternates with the Channel group when the scanner stops on a
channel.
The default site names include the following letter in the 16th position to indicate
the system type:
76
when finished.
MECSL
MECSL
MESL
ME
Advertisement
Table of Contents
