Uniden BCD996T Owner's Manual page 69

UB335ZH.book Page 69 Friday, March 17, 2006 4:35 PM
After selecting this option, select any number from 0-99 to assign the system to a
quick key or press [.No] to assign the system to no quick key, then press
Notes:
• Access single-digit system/site Quick Keys by pressing the single digit on the
keypad during scanning. Access two-digit system Quick Keys by pressing
[.No] then both digits.
• You can assign as many systems to the same quick key as you want.
• To be scanned, a system's Quick Key must be activated and the system must
be unlocked.
Setting the Startup Key
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Startup Key
Select a startup key from 0-9 or select "." for no startup key.
Notes:
• To unlock the system at startup, press and hold the selected startup key while
you apply power. If you do not press the startup key at the time you turn on
power, you can still act while the opening screens are displayed.
• The system Quick Key is also enabled.
• If you press a different key at startup, the system is locked out.
• If you do not assign the system a startup key, the system is not affected by any
key press during startup.
Setting the System Lockout
[MENU]
Program System
Select a conventional system
Edit Sys Option
Set Lockout
Unlocked — The system is scanned when its quick key is enabled.
Temporary L/O — The system is not scanned, even if its quick key is enabled.
Cycling power will remove the lockout.
Lockout — The system is not scanned, even if its quick key is enabled. You must
manually unlock the system.
Programming Your Scanner
.
C
C
69