Setting Channel Alert; Set Record - Uniden BCD996T Owner's Manual

UB335ZH.book Page 90 Friday, March 17, 2006 4:35 PM

Setting Channel Alert

[MENU]
Program System
Select a system
Edit Group
Select a channel group
Edit Channel
Select the channel
Set Alert
Off — the scanner does not alert you when the channel becomes active.
Alert 1 - 9 — the scanner sounds an alert beep to notify you that the channel
has become active. You can choose any of 9 different beep types. Once you
choose an alert tone, then:
Set Level
Auto — the scanner automatically sets the channel alert beep to match the
master volume level.
Level 1 - 15 — the scanner adjusts the volume of the beep to the level you
select.

Set Record

[MENU]
Program System
Select a system
Edit Group
Select a channel group
Edit Channel
Select a channel
Set Record
On — the scanner outputs the signal.
Off — the scanner does not output any audio.
Setting Lockout
[MENU]
Program System
Select a system
Edit Group
Edit Channel
Select a channel
90
MECL
MESL