Table of Contents
Advertisement
UB335ZH.book Page 123 Friday, March 17, 2006 4:35 PM
Elevation Display
Speed Display
Location Display
GPS Review Location Mode
If you have programmed data for a Point of Interest, Dangerous Crossing, and a
Dangerous Road, you can review each set on a screen dedicated to showing just
that data.
Press [E
] in GPS Mode.
YES
The most recent stored location is displayed. Use the Scroll Control to display the
next screen for review.
Important: While you are in normal GPS mode or Scan Mode and you press and
hold [GPS] for 2 seconds, location data at that point is stored. The scanner opens
a dialog to store your current location. The default name is T YYMMDD hhmmss
that indicates the date and time you stored the location point.
The data is put into memory and you are given the opportunity to designate the
location as POI, Dangerous Xing, or Dangerous Road.
However, if you are in Review Mode and press and hold [GPS], the data of the
new point will overwrite the currently displayed data.
The some of the following keys have a somewhat different function while in GPS
Review Mode.
[GPS] — Press and Hold: overwrites and stores current location data
[MENU] — returns to GPS Mode.
[L/O] — changes the status of the currently displayed location data.
[L/O] — press and hold to unlock all locations of the current type (POI, DXG, or
DRG)
Unlocked All TTTs? and Yes="E" / No="." is displayed. TTT shows the
location type as POI, DXG or DRD.
[L/O] — press and hold in Function Mode unlocks all locations of all types.
Unlocked All Location? and Yes="E" / No="." is displayed.
Non-Radio Location Based GPS Features
123
Advertisement
Table of Contents
