Using The Torch - Amplicomms PowerTel M7000 Operating Instructions Manual

Using the torch

Switch on: Press and hold the boost key in standby for
approx. 2 sec.
Switch off: Press and hold the boost key in standby for
approx. 2 sec.
Note:
- The light is generated by a high-power LED. Do not
shine directly into eyes or optical devices.
- Please remember that by the operation of the torch,
the operating time to the next charging of the
phone is shortened.
Dialling a phone number / Calling
• The phone must be in standby (SIM card inserted and
the phone switched on).
• Enter the telephone number incl. the prefix. For ente-
ring a + in front of the country prefix press
two times.
Helpline 0844 800 6503
(See page 69 for costs and hours of operation)
U
SING THE PHONE
quickly
23