Using The Torch - Amplicomms PowerTel M7500 Operating Instructions Manual

U
SING THE PHONE
Switch on: Press and hold the red end call key until the dis-
play light will be switched on. Enter the PIN code for your
SIM card and press OK. Entering the PIN code is not requi-
red if this feature is switched off for your SIM card (refer to
page 66 "SIM lock" / not available for every provider).

Using the torch

Switch on: Press and hold the boost/flashlight key in
standby for approx. 2 sec.
Switch off: Press and hold the boost/flashlight key in
standby for approx. 2 sec.
Note:
- The light is generated by a high-power LED. Do not
shine directly into eyes or optical devices.
- Please remember that by the operation of the torch,
the operating time to the next charging of the
phone is shortened.
26
Helpline 0844 800 6503
(See page 83 for costs and hours of operation)