Doors Assembly; Cart Bottom Panel Assembly - BBQ PC Signature Series Assembly Instructions Manual

Step 2 (Doors assembly)
a) Insert the bottom pin of left door
(AG) into the pre-drilled hole on
the cart bottom panel.
b) Push down the top pin of left door
and insert it into the pre-drilled
hole on the left end of cart
front beam.
c) Repeat the procedure for the
right door (AE) assembly.
d) Close the two doors.
A
E
A G
Step 3 (Cart bottom panel assembly)
a)
AA X4 b)
CC X4
BB X4
c)
d)
N
18
Align the two holes on the right cart
bottom panel (N) with the two holes
on the right bottom of body assembly (A).
Insert one M6 x 15mm bolt (AA), one
M6 flat washer (BB) and one M6 spring
washer (CC) into each pre-drilled hole.
Tighten bolts by hand until secured.
Repeat the same procedure on the left
cart bottom panel (E) with the left bottom
of body assembly (A).
Go back and tighten all bolts using the
screwdriver provided.
A E