Asse Mbly Instr Uctions - BBQ PC Signature Series Assembly Instructions Manual

ASSEM BLY I NSTRUC TI O NS
Remove all contents from the carton packaging. Make sure all parts
are present before attempting assembly. Once the grill is fully
assembled, go back and check to make certain all the bolts are
secure. Tighten again using the screwdriver provided if necessary.
Estimated assembly time: 30 minutes.
S
tep 1 (The transformer assembly)
Note: Before beginning assembly, make certain all swivel casters are locked.
a) Take apart the two pre-installed bolt on cart left panel.
b) Align the two holes on transformer (H) with the two holes on left cart panel.
c) Insert one released bolt, one spring washer and one flat washer into each
pre-drilled holes and tighten by hand.
d) Align the two holes on cable clamp (AI) with the two holes on left cart panel.
e) Insert one bolt (EE), one spring washer (GG) and one flat washer (FF) into
each pre-drilled holes and tighten by hand.
f) Go back and tighten all the bolts using the screwdriver provided.
EE
X2
GG
X2
FF X2
AH
AI
17