Basket Set Assembly; Tank Seat Assembly - BBQ PC Signature Series Assembly Instructions Manual

F
Step 13 (Tank seat assembly)
a) Place the two baskets (G) in the basket set.
Step 12 (Basket set assembly)
a)
b)
c)
AA X4
CC X4
BB X4
23
Align the four holes on the basket
set (F) with the four holes on the
bottom of body assembly (A).
Insert one M6 x 15mm bolt (AA),
one M6 flat washer (BB) and one
M6 spring washer (CC) into each
pre-drilled hole. Tighten bolts by
hand until secured.
Slide the basket out of guiding
rails and tighten all bolts using
the screwdriver provided.
G