Assembly Instructions - BBQ GSF2616AC Owner's Manual

Remove all contents from the carton packaging. Make sure all parts are present before attempting assembly. Once the grill is fully
assembled, go back and check to make certain all the bolts are secure. Tighten again using the screwdriver provided if necessary.
Estimated Assembly Time: 30 minutes.
Step 2
a) Loosen the four bolts on the right back leg (P) and
the left back leg (N), and allow 1/4 bolt's length to
extend from the legs. Align the holes on the lower
back beam (M) with the extended bolts from the
legs (P) & (N). Push down on the lower back beam
(M) until it locks into place, then tighten all the
bolts using screwdriver provided.
b) Repeat the procedure for the upper back beam (L).
GSF2616AC
Owner's Manual

Assembly Instructions

Step 1
a) Loosen the two bolts (pre-installed) on the left
front leg (O) and allow the 1/4 bolt's length to
extend from the left front leg. Align the holes on
the front panel (R) with the extended bolts from
the left front leg (O).
b) Push down on the front panel (R) until it locks
place. Tighten
into
c) Repeat the procedure for the right front leg (Q).
d) Go back and tighten all the bolts using the
screwdriver provided.
7
bolts by hand until secured.