Hydraulic Schematics - Toro ProPass 200 Service Manual

Hydraulic Schematics

NOTE: The hydraulic schematic shown above includes
the hydraulic power pack as the hydraulic supply
source. If your ProPass uses hydraulic supply from the
tow vehicle, the vehicle includes the hydraulic pump, re-
lief valve and hydraulic reservoir that are used for the
ProPass.
NOTE: The rear option is either the twin spinner (two
motors) or the cross conveyor (one motor).
Hydraulic System
FLOOR
SOLENOID
VALVE
FLOOR
CF
CONTROL
VALVE
IN
FLOOR
EX
MOTOR
HYDRAULIC
POWER PACK
Page 3 - - 12
OPTION
SOLENOID
VALVE
EX
IN
CF
ProPass 200
Hydraulic Schematic
Standard Hydraulic Controls
All solenoids are shown as
de- -energized
NOTE: The hydraulic hose kit used when a ProPass re-
ceives its hydraulic supply from a tow vehicle includes
a check valve in the return hose assembly (see Hydraul-
ic Hose Kit in the General Information section of this
chapter).
OPTION
CONTROL
VALVE
SPINNER
MOTORS
CONVEYOR
MOTOR
ProPass 200